Motorcycle rearview mirror customization method

The rearview mirror device method is as follows:

1. After buying the rearview mirror suitable for your motorcycle, you need to distinguish the logo on the black plastic card tray on the reverse side of the lens, with the letter L on the left lens and the letter R on the right lens.

2. Remove the remaining exposed metal wire sheath on the rearview mirror with something, and then screw it separately with the copper wire at one end of the heating wire (as shown in the figure), and wrap it with insulating tape.

3. Connect the metal buckle at one end of the heating wire, and then clamp it with the bayonet above the black plastic card tray on the reverse side of the lens; Put the lens connected to the wire into the rearview mirror housing, gently adjust the orientation, press slowly and hard, when you hear the "click" sound, it means that all the lens buckles have been installed.

4. After the installation, you should sit in the car and adjust the rearview mirror to the appropriate orientation to ensure that there is a viewing angle

5. The rearview mirror is something that the driver sits in the car and directly obtains external information such as the rear, side, and bottom of the car. In order to facilitate the operation of the driver, prevent the occurrence of traffic accidents, and ensure the person, all countries have stipulated that it is necessary to install rearview mirrors on motorcycles, and all rearview mirrors must be able to adjust the direction.

6. The rearview mirror has a vision problem, that is, it refers to the scale that the mirror can reflect. In the industry, there is a reference to the three elements of vision, that is, the distance between the driver's eyes and the rearview mirror; The small size of the rearview mirror and the radius of curvature of the rearview mirror. There is a definite connection between these three elements, when the distance and scale of the rearview mirror are combined, the smaller the radius of curvature of the mirror, the larger the horizon reflected by the mirror. When the radius of curvature of the mirror is combined, the larger the scale of the mirror, the larger the horizon reflected by the mirror.

7. The rearview mirror also has a reflectivity target. The greater the reflectivity, the clearer the picture reflected by the mirror. The magnitude of the reflectivity is related to the data of the reflective film on the inner and outer surface of the mirror.

8. Due to the speed progress of general motorcycles, wind resistance and noise are important issues for designers to consider, so the outline of the exterior mirror should fit the aerodynamics, and the smooth lines should be used to reduce wind resistance and wind noise as much as possible.